This is the most advanced and accurate lubrication system for pneumatic equipment. Serv-Oil enables a constant, regular and accurate lubrication, in an outstanding way.
The oil is taken to the inlet of the equipment to be lubricated by means of a capillary tube, thus preventing oil and air from being mixed; therefore, the inner wall of the air feeding hose isn't impregnated with oil - which solves a common problem of conventional systems.
Serv-Oil is composed by four sets:
1 - Flow valve:
A sensitive disk sends a pneumatic signal to the oil injector when the equipment is turned on.
2 - Pulse counter:
It can be found below the flow valve, and has the purpose of controlling the injector's work frequency - which can be adjusted for each cycle, for every five cycles or for every ten cycles.
3 - Oil reservoir:
It isn't pressurized, so it can be refilled whenever you desire, in a fast way. Serv-Oil can be provided without reservoir, in order to be fed by a central reservoir system.
4 - Oil injector:
Pressures of 4 bar (at least) enable injecting oil with the right volume, in a designated point. Each injection can be adjusted from 1/100 of drop to 2 drops.
It doesn't use a spray system and thus avoids oil impregnation in the hoses, keeping the workplace clean;
o Being an accurate and constant lubrication system, it extends machine lifetime, and allows increased precision in the applied torque;
• It avoids oil waste;
• It can be easily coupled to conventional filters and pressure regulators;
• Decreases oil refilling frequency.